|
\r產品概述：\r<\/p>\r \r本產品適用于修補4mm2<\/span><\/span>—<\/span>185mm2<\/span><\/span>的電纜線壓號之用，主要號有：<\/span>0<\/span><\/span>、<\/span>1<\/span><\/span>、<\/span>2<\/span><\/span>、<\/span>3<\/span><\/span>、<\/span>4<\/span><\/span>、<\/span>5<\/span><\/span>、<\/span>6<\/span><\/span>、<\/span>7<\/span><\/span>、<\/span>8<\/span><\/span>、<\/span>9<\/span><\/span>、<\/span>M<\/span><\/span>、<\/span>X<\/span><\/span>、<\/span>+<\/span><\/span>、—、＃等一系列數字、字母組成，可任意重復使用，本產品壽命長，不易損壞，結構簡單牢靠，操作方便，是煤礦企業**壓號電纜維修設備之一。<\/span> GSYHJ<\/span><\/span>電纜壓號機**研制生產的產品，本機主要由自動撥號字頭、電氣、儀表、溫控、紅外線加熱系統組成。該設備在工作中移動方便，易于操作，壓號速度快、時間短。字頭數碼采用優質鎳鉻鋁合金冶煉加工而成，根據電纜的平方、長度和編碼任意排列，壓出的數碼，字體清晰、大方、不易磨損，其中關鍵是壓出的數碼深淺適度，符合煤礦對電纜的安全使用要求。<\/span><\/span> \r<\/p>\r\r使用說明<\/span><\/span>
\r<\/span><\/span> <\/span>1<\/span><\/span>、打開包裝箱、檢查運輸途中是否有損壞部件和儀表，如果完好無損即可進行使用。<\/span><\/span>
\r<\/span><\/span> <\/span>2<\/span><\/span>、接通<\/span>220v<\/span><\/span>電源，接好接地線。<\/span><\/span>
\r<\/span><\/span> <\/span>3<\/span><\/span>、調整所需要編號、平方、長度字輪。<\/span><\/span>
\r<\/span><\/span> <\/span>4<\/span><\/span>、根據電纜截面積、調整電纜可調整滑塊。<\/span><\/span>
\r<\/span><\/span> <\/span>5<\/span><\/span>、將電纜放入調好的字輪上，可將壓線器壓緊<\/span>(<\/span><\/span>有手擰絲桿、手擰轉輪、手動液壓和全自動液壓<\/span>)<\/span><\/span>都必須壓緊電纜方可工作。<\/span><\/span>
\r<\/span><\/span> <\/span>6<\/span><\/span>、打開電源開關，將溫度調到需要的溫度即可<\/span>(140—180<\/span><\/span>度之間<\/span>)<\/span><\/span>。<\/span><\/span>
\r<\/span><\/span> <\/span>7<\/span><\/span>、待溫度升到一定程度時，自動停電，有電鈴可報警，沒電鈴的可人工看守，這時切記再次加壓，效果為**。<\/span><\/span>
\r<\/span><\/span> <\/span>8<\/span><\/span>、待溫度降到<\/span>60—40<\/span><\/span>℃<\/span>時<\/span>(<\/span><\/span>擰開支臂手輪或液壓自動閥取出電纜即可<\/span>)<\/span><\/span>。<\/span><\/span>\r<\/p><\/div>
|
在線咨詢 
