国精产品一区一区三区有限,国产欧美日韩,97热久久免费频精品99,初尝黑人巨砲波多野结衣

濟寧天通設備有限公司是一家從事水處理設備生產、銷售集一體化的企業，經過不斷的努力在國內外獲得了供不應求的大好市場，贏得了客戶的一致好評。多年的發展歷程，公司始終堅持創新、品質、服務、敬業、感恩的理念。采納新創意，嚴格質量，全方位的服務跟蹤，堅持做出高品質產品。我公司主要產品：水處理設備，污水處理設備、廢水處理設備、工業污水設備、農業廢水設備、雨水凈水設備、醫院污水設備、鋼廠廢水設備、屠宰場廢水設備、食品廠廢水處理設備等多種設備，可根據要求專業定制水處理設備。

水處理的方式包括物理處理和化學處理。人類進行水處理的方式已經有相當多年歷史，物理方法包括利用各種孔徑大小不同的濾材，利用吸附或阻隔方式，將水中的雜質排除在外，吸附方式中較重要者為以活性炭進行吸附，阻隔方法則是將水通過濾材，讓體積較大的雜質無法通過，進而獲得較為干凈的水。另外，物理方法也包括沉淀法，就是讓比重較小的雜質浮于水面撈出，或是比重較大的雜質沉淀于下，進而取得。化學方法則是利用各種化學藥品將水中雜質轉化為對人體傷害較小的物質，或是將雜質集中，歷史最久的化學處理方法應該可以算是用明礬加入水中，水中雜質集合后，體積變大，便可用過濾法，將雜質去除。

市政污水處理工程案例(缺氧+傳統活性污泥法)

某污水處理廠是大連市修建的一座大型污水處理廠。該廠的建設引進關鍵技術、監控裝置和設備，提高污水處理效率，充分利用生物能，節約能耗，節省用地，降低工程造價和運行成本。

該污水處理廠的工藝設計，在進行各種工藝方案比較的基礎上，仍選用鼓風曝氣的設計方案。其理由是大型污水處理廠采用鼓風曝氣工藝管理簡便、運行可靠。該污水處理廠肖化吸收了國外的先進技術，對每個單項構筑物及污水、污泥處理的細部方案都作了改進，如進水泵房及污水量計量的自動控制、洗砂排砂、排泥濃度控制、溶解氧白控、脫氨反硝化工藝、二沉池出水槽新工藝、消化池投泥方式、大型消化池的沼氣攪拌、沼氣發電升壓聯網、沼氣鍋爐及排泥閥、可調堰、細格柵等先進技術都在該廠得到了應用。

  該廠污水處理系統分4個系列，4個圓形初沉池排成一行，4個曝氣池組成田字形，8座二沉池設在廠區南側，臨近北塘排水河，使處理出水可就近排人河道。污泥處理區設在廠的西北角，5個消化池組成梅花形，污泥處理的控制室設在5個捎化池的中央。北側設有兩個沼氣儲罐、污泥脫水機房和沼氣發電機房等。

  主要處理構筑物及設備參數：

    1.進水格柵

    格柵是污水處理廠的第一道預處理設施。該廠設6臺垂直格柵，由計算機程序控制。高水位時格柵清污機將連續工作，運送格柵攔截的浮渣的皮帶運輸機與格柵清污機聯鎖運行，在所有格柵停止工作后，皮帶運輸機仍將繼續運行一段時間。

    6臺垂直格柵每臺寬2m，柵條凈距25 mm。

    2.進水泵房

    設6臺HLWB-10型立式渦殼混流泵，5用1備。

    水泵參數：流量1.32立方/秒，揚程13.2m，電機動率260kw。

    泵房設有6個控制水位，控制5臺泵的運行。為避免個別水泵負荷偏重而反復起動，水泵將依次循環投人運行。當某臺泵因故障停止工作時，另一臺泵將自動投入運行。

    3.曲面格柵

    8臺曲面格柵設在沉砂池的端部。每臺格柵寬度1.2m，柵條曲率半徑2.0 m，柵條凈距10m。

    每臺格柵的清污動作根據水位模擬信號由計算機控制。當水位差處于正常值時，清污工作將按設定時間動作；當前后水位差超過設定值時，清污工作將連續進行。如果清污工作連續操作時間過長，計算機將發出報警信號。

    曲面格柵刮出的浮渣落在皮帶運輸機上，皮帶運輸機的運行與格柵清污機聯鎖，清污工作停止后，運輸機仍將運行一段時間。  

    4.沉砂池

    曝氣沉砂池設有6條廊道，每條長30m、寬4m、深4.3m，水力停留時間約6min。

    池內設有振動空氣(VIBRAIR)曝氣器648個，供氣量為5184立方米/小時。全池設兩座吸砂工作橋，每個工作橋上有3個空氣提砂裝置，負責3條廊道的吸砂。污穢的砂水被提升到洗砂槽，經攪拌后，有機物隨洗砂水流回進水泵房，砂水被送至分砂機進行進一步脫水。分砂機設在進水泵房的上部建筑頂層，以便脫水的砂粒流入砂斗運走。

    吸砂工作橋用行程開關控制，其上設有刮渣設施，以清除池內浮渣。空氣提砂裝置要求注續工作，由計算機控制。當空氣壓縮機發生故障時，備用機可自動投入。空氣壓縮機、分砂機和泵的運行狀態由計算機監控，如出現故障將自動報警。

    5.初沉池

    初沉池曾設計了矩形和圓形兩種方案，從運行管理、占地和混凝土用量等方面進行比較，認為圓形輻流式沉淀池設備運轉可靠、管理簡便，故采用了4座配有周邊驅動全橋式刮混機的輻流式沉淀池，直徑達60m，水深4.5 m，沉淀時間2.26h。

    初沉池運行的關鍵是排泥，4座池輪流排泥的程序由計算機控制。每個排泥閥靠頻率/時間自動操作。其功率/時間將根據計算機監測到的污泥濃度和流量束進行調整。排泥閥分兩部分，啟用的是電動閥門，排泥口用的是可手動調節的升降閥，該閥屬非標設備。

    6.初沉污泥泵房

    為防止排泥系統出現堵塞故障，在兩座初沉池間設一座污泥泵房。安裝GF單螺桿泵4臺，兩座泵房共裝8臺污泥泵。污泥泵按頻率鄺j問自動操作，并由計算機進行調整，兩座污泥泵房交替運行，在泵房的出口處設有污泥濃度模擬測量裝置，污泥進人濃縮池前進行

流量檢測。這些信號進入計算機后，將用于計算污泥的排放量，以調整排泥技術上頻率和排混的持續時間。

Jining day general equipment co., LTD. Is a company engaged in water treatment equipment production, sales integration enterprise, after continuous efforts won the demand of the market both at home and abroad, won the customer consistent high praise. Over the years, the company has always adhered to the concept of innovation, quality, service, dedication and gratitude. Adopt new ideas, strict quality, all-round service tracking, insist on making high-quality products. My company main products: water treatment equipment, sewage treatment equipment, wastewater treatment, industrial wastewater, agricultural wastewater, rain water purification equipment, hospital sewage equipment, steel plant waste water equipment, slaughterhouse wastewater treatment equipment, food factory waste water treatment equipment and other equipment, can professional custom according to the water treatment equipment.

The way water is treated includes physical processing and chemical treatment. The ways in which human water treatment have been years of history, physical methods including the use of a variety of different aperture size, the filter material using adsorption or blocking way, exclude the impurities in the water, the adsorption mode of less important for adsorption on activated carbon, blocking method is through the water, the filter material for large impurity cannot pass, and get more clean water. In addition, the physical method also includes precipitation method, which is to make the impurity of the smaller proportion floating in the water, or the impurities of the larger proportion are deposited in the lower, and thus obtained. Chemical method is to use various chemicals to the water impurities into smaller material harm to the human body, or the impurity concentration, the oldest of the chemical treatment method should be use alum in the water, the water impurities after collection, volume change, used to filter method, remove the impurities.

Municipal sewage treatment works (hypoxia + traditional activated sludge method)

A sewage treatment plant is a large sewage treatment plant built in dalian. The construction of the plant introduces key technologies, monitoring devices and equipment to improve the efficiency of sewage treatment, make full use of the energy of biomass, save energy, save land, reduce project cost and operation cost.

The process design of the wastewater treatment plant is based on the comparison of various process schemes, and the design scheme of air blast aeration is still selected. The reason is that the large sewage treatment plant is simple and reliable. The sewage treatment plant XiaoHua absorbed foreign advanced technology, for each single structure and detailed scheme of sewage and sludge treatment were improved, such as feed water pump house and the automatic control of sewage quantity measurement, washing sand sand, mud concentration control, white accused of dissolved oxygen, ammonia denitrification technology, new technology of the second pond, the water tank, the digester throw mud way, large biogas digester of stirring, biogas power generation booster networking, biogas boiler and mud valve, adjustable weir, fine grille and other advanced technology have been applied in the factory.

Four series are the factory sewage treatment system, four round pond, line, at the beginning of four aeration ChiZu narita glyph, eight the second pond is located in the south area of the plant near the north river, pond drainage treatment, water can row to the nearest river. The sludge treatment area is located in the northwest corner of the factory, and the five digesters form the plum blossom shape, and the control room of sludge treatment is in the center of 5. There are two biogas storage tanks, sludge dewatering machine room and biogas generator room.

Main structure and equipment parameters:

1. Inlet grille

Grille is the first pre-treatment facility for sewage treatment plants. The factory has 6 vertical grille, controlled by computer program. High water level grille decontamination machine will work continuously, carrying grille intercept the scum of the belt conveyor with interlocking operation grille decontamination machine, after all the grille to stop working, belt conveyor will continue to run for a period of time.

6 vertical grille for each width of 2m, grid strip distance of 25 mm.

2. Inlet pump room

Set up 6 hlwb-10 vertical turboshell mixed pump, 5 with 1 backup.

Water pump parameters: 1.32m3 / second, lift 13.2 m, electric mobility rate 260kw.

The pump room has 6 control water level, control the operation of 5 pumps. In order to avoid the repeated starting of individual pump load, the water pump will be circulated in turn. When a pump fails to work, another pump will be automatically put into operation.

3. Curved grille

The 8 curved grille is located at the end of the sink. The width of each grille is 1.2 m, the curvature radius of the grating is 2.0m and the grid bar is 10m.

The cleaning action of each grille is controlled by computer according to the water level simulation signal. When the water level is at the normal value, the cleaning work will be determined by the setting time; When the current water level difference exceeds the set value, the cleaning work will be carried out continuously. If the clean-up operation is too long, the computer will send an alarm signal.

The scum of the curved grille falls onto the belt conveyor, the belt conveyor runs with the grille cleaning machine interlock, the transport plane will still run for some time after the decontamination work stops.

4. The grit chamber

There are 6 corridors in the aeration and settling pit, with each length 30m, 4m wide and 4.3m deep, and the water retention time is about 6min.

The tank has a VIBRAIR aerator of 648 and air supply of 5,184 cubic meters per hour. There are two sand suction work Bridges in the whole pool, and each work bridge has three air lift equipment, which is responsible for the sand absorption of three corridors. The polluted sand water is hoisted to the washing trough. After stirring, the organic matter comes back into the inlet pump room with the washing water, and the sand water is sent to the sander for further dehydration. The sand control machine is located at the top of the upper building of the inlet pump room so that the sand can be transported by the sand.

The sand suction work bridge is controlled by the travel switch, which has the slag removal facilities to remove the dregs in the tank. The air lifting device requires the injection of continuous work, controlled by computer. When the air compressor fails, the standby machine can automatically input. The operation state of air compressor, sand separating machine and pump is monitored by computer.

5. At the beginning of pond,

Pond, once at the beginning of design for rectangular and circular two kinds of schemes, from aspects of the operation and management, covering and concrete consumption comparison, think circular radial flow sedimentation tank equipment and reliable operation, easy management, so the four with peripheral driving bridge type mixed scraper radial sedimentation basin, 60 m in diameter and depth of 4.5 m, precipitation time 2.26 h.

The key to the initial sink operation is the sludge discharge, and the four pools rotate the mud in turn by computer control. Each dredge valve operates automatically by frequency/time. The power/time will be adjusted according to the concentration of sludge and the flux of the monitor. The dredge valve is divided into two parts, and the electric valve is enabled. The discharge valve is a manual adjustable lift valve, which is a non-standard equipment.

6. Sludge pump room

A sludge pump room was established between two initial sinks to prevent the sludge system from being blocked. Installation GF single screw pump 4, two pump room with 8 sludge pump. Sludge pump according to the frequency of kuang j q automatic operation, and adjusted by a computer, two sludge pump room, alternately in the pump room is equipped with the sludge concentration at the exit to simulate measurement device, sludge thickener in before

Flow detection. These signals will then be used to calculate the amount of sludge emitted by the computer to adjust the duration of the frequency and mixing of the sludge.