配電盤用扁型電源
我們的新型微型電源單元與邏輯模塊采用了相同的設計，以最小的體積提供了最大的性能：提高了整個負載范圍的效率，很低的空載功率損耗確保了運行高效率。單相電網寬電壓輸入、直流供電、寬工作溫度范圍、全面的驗證，以及專門針對容性負載進行優化設計的開關特性，使得它們尤其適用于通用目的。這此電源性能可靠，采用平型、級式配置，可以極其靈活地用于例如配電板等的各種大量應用。
要進一步提高 24 V 電源的可用性，可將 LOGO!Power 電源與 DC UPS、冗余和選擇性模塊結合使用。
主要產品亮點
-
5 V DC/ 3 A 和 6.3 A、12 V DC/ 1.9 A 和 4.5 A、15 V DC/ 1.9 A 和 4 A 以及 24 V DC/ 1.3 A、2.5 A 和 4 A
-
單相，輸入范圍寬，適用于 85 V 至 264 VAC 或 110 V 至 300 VDC
-
扁平 LOGO! 設計，安裝深度僅為 55 mm
-
在整個負載范圍內具有高效率，空載損耗低
-
起動時的功率儲備可達容性負載額定電流的 1.5 倍
-
溫度范圍寬，-20 ~ +70℃
-
獲得全面認證，如 cULus、CB、FM、ATEX、cCSAus Class I Div. 2、GL 和 ABS
he flat power supply unit for distribution boards
Small. Clever. LOGO!Power
Thanks to its stepped profile design, the LOGO!Power product family is ideally suited for low installation depths, such as in miniature distribution boards. The stabilized power supplies with a wide range input of 100 … 240 V AC (85 … 264 V) and110 ... 300 V DC are available in two performance classes with an output voltage of 5 V and 15 V, in three performance classes with 12 V and in four performance classes with 24 V. The 12 V and 24 V versions are ideal for supplying LOGO! controllers with the corresponding voltage input. The high level of efficiency across the entire load range as well as the low no-load losses result in lower overall energy consumption. Greater convenience when commissioning and servicing thanks to the integrated current monitor. The extended temperature range from -25 °C to +70 °C enables a host of additional applications.
To further increase 24 V availability, the 24 V LOGO!Power power supply units can be combined with DC-UPS, redundancy and selectivity modules.
LOGO!Power is the ideal choice when components need to be supplied with DC voltage. It can provide currents up to 4 A. This mini power pack can be used regardless of industry, e.g. in building technology applications for light and heating controllers or for access control systems. LOGO!Power is also well-suited for use in industrial automation, such as in packaging machine, machine tool, conveyor belt or sorting system applications.
Main product highlights
-
Low width
with minimum of 18 mm to maximum of 72 mm, thus requiring very little space in the control cabinet
-
High energy efficiency
with efficiency levels of up to 90% over the entire power range and ERP-compliant no-load losses of < 0.3 W
-
Global use
thanks to extended operating temperature range from -25 °C to +70 °C (previously -20°C) and international certifications
-
Load monitoring
thanks to real-time measurement of output current without disconnecting the cable, i.e. without interrupting the DC supply (new)
-
Flexible mounting
with standard rail or wall mounting in different installation positions
-
Wide portfolio
with 11 devices with 5 V, 12 V, 15 V and 24 V DC up to 100 watts (new: 12 V/0.9 A and 24 V/0.6 A)
-
Flexible deployment
on all standard single-phase supply networks thanks to wide range input of 100-240 V AC without switchover and operation on DC networks with 85 – 300 V DC
-
Reliable
thanks to assured connection of high loads when starting up as well as constant current in the event of overload
功能強大的標準電源
單相和三相 SITOP smart 是通用型和功能強大的標準電源，適用于工廠機器設備。雖然結構十分緊湊，但它們具有優異的過載響應：由于功率提升 150 %，可毫無問題地連接較高功耗的負載；120% 的固定過載能力為擴展提供了功率儲備。這些電源具有高能效，能耗低，在控制柜內的散熱量很小。
要進一步提高 24 V 電源的可用性，可將 SITOP smart 電源與緩沖、DC UPS、冗余和選擇性模塊結合使用。
主要產品亮點
-
單相，24 V DC/2.5 A、5 A、10 A 和 20 A 以及 12 V/7 A 和 14 A
-
三相，24 V DC/10 A、20 A 和 40 A
-
設計緊湊 – 無需留出側面間隙
-
具有額定電流的 1.5 倍的額外電源 (5 s/min)，允許短暫的功能過載
-
在高達 45 °C 環境溫度下具有 1.2 倍額定電流的永久性過載能力（24 V 型號）
-
效率高達 91.5 %
-
可調輸出電壓用來補償電壓降
-
信號觸點可方便地集成到工廠監視系統中
-
溫度范圍寬：-25 或 -10 至 +70 °C
-
通過全面認證，如 CULus、ATEX 或 GL
在線咨詢 
